We are
approved by Lockheed Martin for
the following processes:
|
Code
|
Process
Description
|
Comments
|
| 110A |
MIL-STD-6866 / ASTM-E-1417 Penetrant Inspection |
|
| 110B |
NDTS-1101 Penetrant Inspection |
INCLUDES 1A, 1B, 1C; SEE FWQPL FOR SPECIFIC
MATERIALS |
| 110C1 |
NDTS-1101, Aluminum Pre-Penetrant Etch |
PER P.S. 12050.1 |
| 110C2 |
NDTS-1101, Titanium Pre-Penetrant Etch |
PER P.S. 12050.6
|
| 110C3 |
NDTS-1101, Steel Pre-Penetrant Etch |
PER P.S. 12050.5
|
| 110D |
NDTS-1101, Zone 1A Fracture Critical Penetrant
Inspection |
|
| 110E |
NDTS-1101, Zone 1B Fracture Critical Penetrant
Inspection |
|
| 110F |
NDTS-1101, Zone 1C Fracture Critical Penetrant
Inspection |
|
| 110G |
PFM 7500 Level AA Penetrant Inspection |
|
| 110H |
PFM 7500 Level A Penetrant Inspection |
|
| 110I |
PFM 7500 Level B Penetrant Inspection |
|
| 111A |
STP 53-201 Penetrant Inspection |
|
| 111B |
P540003 Penetrant Inspection |
|
| 111C |
LCP 72-1068 Penetrant Inspection |
|
| 112 |
5PTPCL02 Penetrant Inspection |
|
| 112A |
5PTPCL02 Approved For Fracture Durability
Critical Penetrant Inspection |
|
| 146 |
5PTPCG06 Penetrant Inspection |
|
| 146A |
5PTPCG06 Fracture Durability Critical
Demonstration Penetrant Inspection |
SEE FACILITY QUALIFICATION RECORD FROM LMTAS F-22
LEVEL 3 EXPIRES 04/2005 |
| 146B1 |
5PTPGG01, Aluminum Pre-Penetrant Etch |
PER P.S. 12050.1 |
| 146B2 |
5PTPGG01, Titanium Pre-Penetrant Etch |
PER P.S. 12050.6 |
| 146B3 |
5PTPGG01, PH Steels Pre-Penetrant Etch |
PER P.S. 12050.5 |
| 146B4 |
5PTPGG01, Nickel Alloys Pre-Penetrant Etch |
|
| 146B5 |
5PTPGL01 Pre Penetrant Etch Titanium |
PP5.2 REV. D DATED 4/5/02 |
| 146B6 |
5PTPGL03 Aluminum Prepenetrant Etch |
PP5.2 REV. D DATED 4/5/02 |
| 146B7 |
5PTPGL04 PH STEELS AND NICKEL ALLOYS |
PP5.2 REV. D, DATED 4/5/02 |
| 153A |
5PTPCT19 Ammonium Bifluoride Etch Insp of
Titanium Al |
PER PP 5.6 DATED 06/14/02 INSPECTORS M. CARTER/K.
KUHNE |
| 160 |
NDTS-1500 / 1501 Hardness Testing |
|
| 161 |
NDTS-1500 / 1502 Conductivity Testing |
|
| 164 |
5PTPCG09 Appendix A Hardness Testing |
|
| 165 |
5PTPCG09 Appendix B Conductivity Testing |
|
| 166 |
5PTPTL19 Hardness / Conductivity of Aluminum |
|
| 200A |
MIL-A-8625, Type 1 Chromic Acid Anodize |
|
| 200B |
MIL-A-8625 Type II Sulfuric Acid Anodize |
|
| 200C |
MIL-A-8625, Type III Hard Anodize |
|
| 200H |
STP 58-209 Chromic Acid Anodize |
|
| 200I |
Process Spec C-0494 Chromic Acid Anodize |
|
| 200J |
LCP77-2038/LADC-P-77-2038 Chromic Acid Anodize |
|
| 200K |
5PTPHL14 Chromic Acid Anodize |
|
| 200L |
STP 58-208 Sulfuric Acid Anodize |
|
| 200M |
Process Spec C-0494 Sulfuric Acid Anodize |
|
| 200N |
LCP77-2037/LADC-P-77-2037 Sulfuric Acid Anodize |
|
| 200O |
STP 58-206 Hard Anodize |
|
| 200P |
Process Spec C-0445/0445 Hard Anodize |
|
| 200Q |
LCP77-1063/LADC-P-77-1063 Hard Anodize |
|
| 200R |
5PTPHL12 Hard Anodize |
|
| 205 |
5PTPHG16 Titanium Conversion Coating |
PER P.S. 7.1 DATED 10/27/95 PROCEDURE MAY NOT BE
REVISED WITHOUT APPROVAL |
| 206 |
AMS-2486 Titanium Conversion Coating |
APPROVAL BASED UPON LETTER FROM R. TRICE F22 ENG.
AND APPROVAL FOR 5PTPHG16. |
| 207 |
FPS-0116 Titanium Conversion Coating |
|
| 210 |
MIL-C-5541 Chem Film |
|
| 210A |
STP 58-405 Chem Film |
|
| 210B |
Process Spec C-0498 Chem Film |
|
| 210C |
P56011 Chem Film |
|
| 210D |
LCP77-1021/LADC-P-77-1021 Chem Film |
|
| 210E |
5PTPHL18 Chem Film |
|
| 240A |
MIL-F-18264 Prime and Paint |
|
| 242A |
MIL-C-27725/AMS-C-27725 Fuel Tank Coating |
|
| 242B |
FPS-1004 Fuel Tank Coating |
|
| 242D |
STP 59-505 Fuel Tank Coating |
|
| 242E |
Proc Bulletin G639 MIL-C-27725 Fuel Tank Coating |
|
| 250A |
FPS-3006 Solid Film Lubricant |
APPLICATOR CHERYL FORD & JON CARSTAIRS. |
| 251 |
MIL-L-46010 Solid Film Lubricant |
|
| 252 |
STP 62-005 Solid Film Lubricant |
|
| 253 |
LADC-P-81-2064 Solid Film Lubricants |
|
| 330 |
FPS-3020 Descaling |
|
